Aluminum Solar Studs Light Pavement Marker C3

Aluminum Solar studs light Features:

•Up to 800 meters of visibility.

•Reliable all night, all-year-round performance.

•Totally sustainable harnessing free solar energy.

•Used where street lighting is either unavailable, solar stud not cost-effective, or environmentally impossible.

•Cost-effective, LED solar studs are easy to install and require absolutely no wires or maintenance.

•Solar-powered road studs self-contained surface mounted.

•Solar studs for road accept OEM/ODM

Aluminum Solar Studs Light Pavement Marker Parameters:

Application of Aluminum LED solar studs C3:

♥Schools and hospitals

♥Highways

♥High traffic areas

♥Walking paths

♥Transit stations

♥Parks and campuses

♥Urban Road

How to install Solar Studs Light Pavement Marker C3:

1.Carefully mark the distance between the placement of solar road stud lights. To prevent an adverse effect on the ground, use a proper tool such as Core Drill. Drill 125mm and depth will be 45mm.

2.Remove all debris from the installation hole.

3.Pour epoxy into the holes per the manufacturer’s instruction.

4.Verity that the installation hole is straight. Verify that the installation hole is large enough to allow the epoxy to surround the solar road stud shaft.

5.Set the lighting surface of the solar stud light to the desired viewing angle. Verify the epoxy is evenly adhering to the installation hole and solar road stud shaft.

After curing the LED solar road stud for 6-8 hours, remove the installation of the isolation facility.